Rear Brake Shoes: Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Clean brake shoe-to-backing plate contact surfaces, and lubricate with grease. Lubricate parking brake pivot pin with grease. For installation, reverse removal procedure. Tighten hub nut to 124 ft. lbs. (168 N.m). Adjust brake shoes. See REAR BRAKE SHOES under ADJUSTMENTS.