Power Brake Unit: Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
For installation, reverse removal procedure. Tighten 4 booster mounting nuts and 2 master cylinder mounting nuts to 21 ft. lbs. (28 N.m). Lubricate pedal pin when installing. Use NEW retainer clip on booster input rod-to-brake pedal pin. Check stop light operation.