Master Cylinder: Removal
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Place shop towel under master cylinder to absorb fluid. Disconnect primary and secondary brake tubes from master cylinder housing. Install plugs at brake tube outlets. Remove 2 nuts attaching master cylinder to power brake unit. Slide master cylinder straight out and away from brake booster unit.