Master Cylinder: Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Position master cylinder over studs on brake booster. Ensure alignment of push rod with master cylinder piston. Tighten mounting nuts to 21 ft. lbs. (28 N.m). Connect brake tubes to master cylinder and tighten fittings to 13 ft. lbs. (17 N.m).