Front Brake Caliper & Pads: Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Clean and lubricate caliper-to-caliper adapter sliding surfaces. Completely retract piston into piston bore. Install inboard pad assembly into caliper piston. Slide outboard pad onto caliper assembly. To complete installation, reverse removal procedure. When installing caliper guide pins, tighten to 30 ft. lbs. (41 N.m). Ensure guide pin bolts are not cross-threaded. Pump brake pedal several times until pedal is firm.