Stoplight Switch
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
With switch installed in retaining bracket, push switch as far forward as it will go. Brake pedal will move forward slightly. Gently pull back on pedal, bringing striker back toward switch until brake pedal will go back no farther. This causes switch to ratchet backward to correct position. Very little movement is required and no further adjustment is necessary.