LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Overhaul - 46 & 47 Automatic Transmission Series) >> Transmission Component Disassembly & Reassembly >> Front Clutch >> Cleaning & Inspection

Cleaning & Inspection

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1996 Dodge Ram Wagon, 1996 Dodge Ram Van, 1996 Dodge Pickup, 1996 Dodge Dakota, and 1996 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean all metal components with solvent and dry with compressed air. Inspect clutch discs for flatness, flaking or glazing. Inspect clutch plates and pressure plate for flatness or damage at plate-to-front clutch retainer tang areas.
  2. Ensure tang areas in front clutch retainer are not damaged and clutch plates slide freely in front clutch retainer. Ensure check ball, located in bottom of front clutch retainer, moves freely. Ensure check ball in the clutch piston is securely staked in place and does not move.
  3. Inspect all sealing surfaces for burrs or scratches. Inspect piston springs for distortion. Replace damaged components.
scientia non olet · About LEMON Manuals