Torque Specifications
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1996 Dodge Ram Wagon, 1996 Dodge Ram Van, 1996 Dodge Pickup, 1996 Dodge Dakota, and 1996 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Band Adjusting Screw Lock Nut | ||||
| Front Band | 25 (34) | |||
| Rear Band | 30 (41) | |||
| Front Band Pin Access Hole Plug | 13 (18) | |||
| Park/Neutral Switch | 25 (34) | |||
| Oil Pan Bolt | 13 (18) | |||
| Oil Pump Bolt | 15 (20) | |||
| Overdrive Piston Retainer Bolt | 13 (18) | |||
| Overdrive Unit-To-Transmission Case Bolt (1) | 25 (34) | |||
| Reaction Shaft Support Bolt | 15 (20) | |||
| Shaft Retainer Plug | 20 (27) | |||
| INCH Lbs. (N.m) | ||||
| Adapter Retainer Bolt | 100 (11.3) | |||
| Adjusting Screw Bracket Screw | 35 (4.0) | |||
| Boost Valve Cover Screw | 35 (4.0) | |||
| Cover Plate Screw | 35 (4.0) | |||
| End Plate Screw | 35 (4.0) | |||
| Filter Assembly Bolt | 35 (4.0) | |||
| Governor Body-To-Governor Drive Bolt | 96 (10.8) | |||
| Limit Valve Cover Screw | 35 (4.0) | |||
| Overrunning Clutch Cam Set Screw | 40 (4.5) | |||
| Pressure Tap Plug | 120 (13.6) | |||
| Separator Plate Brace Screw | 35 (4.0) | |||
| Separator Plate-To-Transfer Plate Screw | 35 (4.0) | |||
| Solenoid Assembly Screw | 72 (8.1) | |||
| Valve Body Screw | 35 (4.0) | |||
| Valve Body-To-Transmission Case Bolt | 100 (11.3) | |||
| Vehicle Speed Sensor-To-Adapter Bolt | 27 (3.1) | |||
|
||||