Cylinder Head R & I: Inspection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, 1995 Jeep Cherokee, 1994 Jeep Wrangler, and 1994 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect cylinder head for cracks and damage. Using straightedge, check cylinder head for warpage across bolt holes and diagonals. Repair or replace cylinder head if warpage exceeds specification or damage exists. See CYLINDER HEAD table under ENGINE SPECIFICATIONS.
- Cylinder head bolts may only be reused once. If this is first time cylinder head has been removed, put a dab of paint on head of each bolt. If bolts already have paint on them or if it is unknown whether bolts have been used before, discard bolts and replace them with NEW head bolts.