Valves & Valve Springs Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, 1995 Jeep Cherokee, 1994 Jeep Wrangler, and 1994 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS
| Application |
Specification |
| Intake Valves |
| Face Angle |
45° |
| Head Diameter |
1.91" (48.5 mm) |
| Minimum Margin |
.031" (.79 mm) |
| Minimum Refinish Length |
4.822" (122.47 mm) |
| Stem Diameter |
.312" (7.92 mm) |
| Valve Tip Maximum Refinish |
.010" (.25 mm) |
| Exhaust Valves |
| Face Angle |
45° |
| Head Diameter |
1.5" (38.1 mm) |
| Minimum Margin |
.031" (.79 mm) |
| Minimum Refinish Length |
4.837" (122.86 mm) |
| Stem Diameter |
.312" (7.92 mm) |
| Valve Tip Maximum Refinish |
.010" (.25 mm) |
| Valve Springs |
| Free Length |
1.967" (49.96 mm) |
| Installed Height |
|
| Out-Of-Square |
|
| Pressure |
| Valve Closed |
81-89 @ 1.640 (36.74-40.36 @ 41.65) |
| Valve Open |
190-210 @ 1.2 (86.18-95.25 @ 30.48) |