LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (2.5L 4-CYL - VIN [P]) >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

WARNING: This page is about a different car, the 1995 Jeep Wrangler and 1994 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate camshaft and dip valve lifters into Mopar Engine Oil Supplement (4318002). Install camshaft. Reverse removal procedure to complete installation.
  2. Pour remaining oil supplement over entire valve train. Supplement must remain in engine oil for at least 1000 miles (1600 km), but need not be drained until next scheduled oil change. Refill cooling system. Adjust ignition timing. Check for leaks.
scientia non olet · About LEMON Manuals