Cylinder Head Specifications
WARNING: This page is about a different car, the 1995 Jeep Wrangler and 1994 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Cylinder Head Height | (1) | ||||
| Maximum Warpage | .008" (.20 mm) | ||||
| Valve Seats | |||||
| Intake Valve | |||||
| Seat Angle | 44.5° | ||||
| Seat Width | .040-.060" (1.02-1.52 mm) | ||||
| Maximum Seat Runout | .0025" (.063 mm) | ||||
| Exhaust Valve | |||||
| Seat Angle | 44.5° | ||||
| Seat Width | .040-.060" (1.02-1.52 mm) | ||||
| Maximum Seat Runout | .0025" (.063 mm) | ||||
| Seat Bore Diameter | (1) | ||||
| Valve Guides | |||||
| Intake Valve | |||||
| Valve Guide I.D. | .313-.314" (7.95-7.98 mm) | ||||
| Valve Stem-To-Guide Oil Clearance | .001-.003" (.03-.08 mm) | ||||
| Exhaust Valve | |||||
| Valve Guide I.D. | .313-.314" (7.95-7.98 mm) | ||||
| Valve Stem-To-Guide Oil Clearance | .001-.003" (.03-.08 mm) | ||||
|
|||||