LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Generator) >> On-Vehicle Testing >> Entering On-Board Diagnostics >> Erasing Diagnostic Trouble Codes (DTCs)

Erasing Diagnostic Trouble Codes (DTCs)

WARNING: This page is about a different car, the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. To erase DTCs, press ATM key. At DRB display, press "2" (ERASE) key. DRB will display ERASE FAULTS ARE YOU SURE? (ENTER TO ERASE). Press ENTER key.
  2. When DRB is finished erasing DTCs, it will display FAULTS ERASED. This display will remain until ATM key is pressed. After ATM key is pressed, display will return to CHARGING MENU screen.
scientia non olet · About LEMON Manuals