Test 3A - No Chimes At All

WARNING: This page is about a different car, the 1995 Jeep Wrangler, 1995 Jeep Grand Cherokee, and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Always turn ignition off prior to disconnecting or connecting any module connector.

NOTE: Perform TEST VER-1B after each repair.

Ensure all doors are closed. Turn ignition on, engine off. Using scan tool, actuate chime test. If chime does not sound, replace body control module. If chime sounds, turn ignition off. Chime system is okay at this time.