Test 7E - Short To Battery

WARNING: This page is about a different car, the 1994 Plymouth Acclaim, 1994 Dodge Spirit, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS. After each repair, perform TEST VER-1.

Using DRB in ohmmeter mode, check resistance of instrument cluster connector terminal No. 7 (Black/Light Green wire). If resistance is more than 5 ohms, repair open in Black/Light Green wire. If resistance is less than 5 ohms, replace MIC or EIC.