LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Engine Controls - Tests W/Codes - 2.5L) >> CODES/MESSAGES (Note: For DTC table, see TEST TC-1A under "Self-Diagnostic Tests.") >> Code 11

Code 11

WARNING: This page is about a different car, the 1995 Jeep Wrangler and 1995 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Scan tool displays NO CRANK REFERENCE SIGNAL AT PCM. Condition is: no crankshaft reference signal picked up during cranking. MIL may not come on.

scientia non olet · About LEMON Manuals