Fuel Pressure Release
WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Fuel system is under pressure. Pressure must be released before servicing fuel system components.
- Disconnect negative battery cable. Loosen fuel tank cap to release tank pressure. Using Fuel Pressure Gauge Set (5069), remove gauge from hose assembly. Place gauge end of hose into an approved gasoline container.
- Remove fuel rail test port protective cap and place a shop towel under test port. To release fuel pressure, screw other end of hose assembly onto test port. Once all fuel pressure is released, install protective cap on test port.