Removal & Installation: Camshaft: Inspection

WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Inspect camshaft and camshaft bearings for wear. Measure camshaft journal diameter and camshaft bearing I.D. Replace camshaft or camshaft bearings if not within specification. See CAMSHAFT table under ENGINE SPECIFICATIONS.

CAUTION: If camshaft is replaced, valve lifters must also be replaced. Whenever NEW camshaft or valve lifters are installed, manufacturer recommends addition of one pint of Chrysler crankcase conditioner to engine oil for at least 500 miles to aid break-in.