Crankshaft, Main & Connecting Rod Bearings Specifications
WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Crankshaft End Play | ||||
| Standard | .002-.007 (.05-.18) | |||
| Wear Limit | .010 (.25) | |||
| Main Bearings | ||||
| Journal Diameter | 2.4995-2.5005 (63.487-63.513) | |||
| Journal Out-Of-Round | .001 (.03) | |||
| Journal Taper | .001 (.03) | |||
| Oil Clearance | ||||
| Journal No. 1 | ||||
| Standard | .0005-.0015 (.013-.038) | |||
| Wear Limit | .0015 (.038) | |||
| All Others | ||||
| Standard | .0005-.0020 (.013-.051) | |||
| Wear Limit | .0025 (.064) | |||
| Connecting Rod Bearings | ||||
| Journal Diameter | 2.124-2.125 (53.950-53.975) | |||
| Journal Out-Of-Round | .001 (.03) | |||
| Journal Taper | .001 (.03) | |||
| Oil Clearance | ||||
| Standard | .0005-.0022 (.013-.056) | |||
| Wear Limit | .0025 (.064) | |||
| Side Play | .006-.014 (.15-.36) | |||