LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Engine Controls - Remove/Install/Overhaul - 5.2L CNG) >> Fuel System >> Fuel Pressure Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Release fuel system pressure. See FUEL SYSTEM PURGING . Disconnect harness connector at sensor. Remove sensor from fuel rail. To install, reverse removal procedure.