LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (CRUISE CONTROL SYSTEMS - 95 Cirrus & Stratus (VIN X), 96 Breeze, Cirrus & Stratus) >> Self-Diagnostics Tests >> Test VSS-VER - Road Test Verification

Test VSS-VER - Road Test Verification

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, 1996 Chrysler Cirrus, 1995 Dodge Stratus, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. If any DTCs have not been diagnosed, go to DTC TEST - CHECKING SYSTEM FOR DIAGNOSTIC TROUBLE CODES  and finish diagnosing remaining DTCs as necessary. If all DTCs have been diagnosed, go to next step.
  2. If Powertrain Control Module (PCM) has not been changed, using scan tool, erase DTCs from PCM. Using scan tool, reset all values in adaptive memory. Disconnect scan tool. To ensure no other DTCs remain, go to next step.
  3. Road test vehicle at a speed of at least 40 MPH. Stop vehicle. Turn engine off for at least 10 seconds. Start engine and continue road test. Ensure transaxle shifts through all gears. After road test, turn engine off. Go to next step.
  4. Using scan tool, check for stored DTCs. If repaired DTC has reset, repair is not complete. Check for related Technical Service Bulletins (TSBs) and return to DTC TEST - CHECKING SYSTEM FOR DIAGNOSTIC TROUBLE CODES , if necessary. If another DTC exists, return to DTC TEST - CHECKING SYSTEM FOR DIAGNOSTIC TROUBLE CODES  and follow path specified by other DTC. If no other DTCs exist, repair is now complete.
scientia non olet · About LEMON Manuals