LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (CRUISE CONTROL SYSTEMS - 95 Cirrus & Stratus (VIN X), 96 Breeze, Cirrus & Stratus) >> Self-Diagnostics Tests >> Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

Test TC-15B - Speed Control Power Relay Circuit & Speed Control Solenoid Circuits

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, 1996 Chrysler Cirrus, 1995 Dodge Stratus, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using an external ohmmeter, check resistance of switched Speed Control (SC) power supply circuit Dark Blue/Red wire between brake switch connector and SC servo connector. If resistance is 5 ohms or less, go to next step. If resistance is more than 5 ohms, repair open SC power supply circuit. Perform TEST SC-VER - SPEED CONTROL VERIFICATION .
  2. Check brake switch adjustment. See BRAKE SWITCH  under REMOVAL & INSTALLATION. If brake switch adjustment is okay, replace brake switch. Perform TEST SC-VER - SPEED CONTROL VERIFICATION . If brake switch adjustment is not okay, adjust brake switch as necessary. Perform TEST SC-VER - SPEED CONTROL VERIFICATION .
scientia non olet · About LEMON Manuals