LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (CRUISE CONTROL SYSTEMS - 95 Cirrus & Stratus (VIN X), 96 Breeze, Cirrus & Stratus) >> Removal & Installation >> Speed Control Switch >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, 1996 Chrysler Cirrus, 1995 Dodge Stratus, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Speed control switches are mounted on the steering wheel and wired through clockspring device under air bag module.
  2. Turn ignition switch to OFF position. Deactivate air bag. See appropriate AIR BAG RESTRAINT SYSTEM article. Remove 2 screws from side of each switch. Rock switch back and forth to remove switch from steering wheel. Disconnect speed control switch connector. To install switch, reverse removal procedure.