LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (CRUISE CONTROL SYSTEMS - 95 Cirrus & Stratus (VIN X), 96 Breeze, Cirrus & Stratus) >> Removal & Installation >> Brake Switch >> Removal

Brake Switch: Removal

WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, 1996 Chrysler Cirrus, 1995 Dodge Stratus, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully depress brake pedal and rotate brake switch counterclockwise approximately 30 degrees. Remove brake switch from bracket.
  2. Depress lock tabs holding brake switch mounting bracket and separate harness connector from brake switch.
scientia non olet · About LEMON Manuals