Brake Switch: Installation
WARNING: This page is about a different car, the 1996 Plymouth Breeze, 1996 Dodge Stratus, 1996 Chrysler Cirrus, 1995 Dodge Stratus, and 1995 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
- Connect harness connector to brake switch. Depress brake pedal and insert brake switch into keyed hole in mounting bracket. Rotate brake switch clockwise into locked position.
- Gently pull back on brake pedal until pedal will go no further. This causes the brake switch plunger to ratchet backward to the correct position. No further adjustment is required.