LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Cherokee Country, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Rotor >> Installation

Front Brake Rotor: Installation

  1. Clean, inspect and repack wheel bearings. Replace grease seal. Coat spindle, bearing races and rotor hub cavity with grease. Clean rotor surface as required.
  2. To install, reverse removal procedure. Tighten spindle nut to specification while rotating rotor to seat bearings. See the TORQUE SPECIFICATIONS  table. Apply brakes until brake pedal is firm. Check brake fluid level.
scientia non olet · About LEMON Manuals