LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Cherokee Country, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Bleeding Brake System >> Master Cylinder Bleeding >> On-Vehicle Bleeding

On-Vehicle Bleeding

  1. Install master cylinder on vehicle after bench bleeding. Remove bleeder lines. Reconnect brakelines. DO NOT tighten brakelines yet.
  2. Slowly force brake pedal to floor and hold in this position. Tighten brakelines. Release brake pedal. Repeat procedure until no air bubbles exist at brakelines. Tighten brakelines to specification. See TORQUE SPECIFICATIONS  . Check for leaks.
scientia non olet · About LEMON Manuals