LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [L] & 4.2L 6-CYL - VIN [T] >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

Clean all gasket surfaces. Install water pump. Torque bolts to specification. See TORQUE SPECIFICATIONS  table. Ensure pump turns freely. To install remaining components, reverse removal procedures. Fill cooling system.

NOTE: Remove coolant temperature sensor switch, located in intake manifold, to bleed air from system while filling.
scientia non olet · About LEMON Manuals