LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [L] & 4.2L 6-CYL - VIN [T] >> Removal & Installation >> Rod Bearing >> Installation

Rod Bearing: Installation

  1. Note color code on edge of bearings removed. Install connecting rod bearings. Using Plastigage method, check bearing clearances. Replace bearings as necessary to obtain correct clearance. See ENGINE SPECIFICATIONS tables at end of this article. Bearings are available in standard and undersize applications.
  2. If required, different sized upper and lower bearings may be installed to obtain correct oil clearance. Torque bolts to specification. See TORQUE SPECIFICATIONS table at end of this article. Check rod side play. Rotate crankshaft to ensure freedom of movement. To install remaining components reverse removal procedure.
NOTE: Avoid combining bearing inserts in excess of .001" (.02 mm) difference in size.
scientia non olet · About LEMON Manuals