LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [L] & 4.2L 6-CYL - VIN [T] >> Removal & Installation >> Rear Main Bearing Oil Seal >> Removal

Rear Main Bearing Oil Seal: Removal

  1. Remove oil pan. See OIL PAN REMOVAL in this section. Remove rear main bearing cap. Note direction of seal lip installation. Remove seal from bearing cap. Loosen all remaining main bearing cap bolts.
  2. Using a brass drift, tap upper seal around crankshaft until seal protrudes enough to permit removal with pliers. Remove seal.
scientia non olet · About LEMON Manuals