LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [L] & 4.2L 6-CYL - VIN [T] >> Removal & Installation >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove cylinder head. See CYLINDER HEAD under MANIFOLDS & CYLINDER HEAD in this article. Remove oil pan. See OIL PAN REMOVAL article at end of ENGINES. Remove ridge or deposits from cylinder bore.
  2. Mark connecting rod and piston for cylinder identification. Remove connecting rod bearing cap. Remove piston and rod assembly.
CAUTION: Arrows on top of piston must point toward front of engine. Oil squirt holes in connecting rod must face camshaft side of engine.
scientia non olet · About LEMON Manuals