LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1990 >> Cherokee Laredo, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [L] & 4.2L 6-CYL - VIN [T] >> Removal & Installation >> Hydraulic Valve Lifters >> Installation

Hydraulic Valve Lifters: Installation

Soak lifter assembly in engine oil prior to installation. To install, reverse removal procedure. Install lifter in original location.

NOTE: Pour remainder of Jeep/Eagle Super Oil Conditioner over entire valve actuating assembly. Conditioner must remain with engine oil for at least 1000 miles, but need not be drained until next scheduled oil change.
scientia non olet · About LEMON Manuals