LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Wagoneer >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Piston Pin >> Removal

Piston Pin: Removal

Position piston on Support (J-21872-1), Pin Pilot (J-21872-2) and Driver (J-21872-3) on an arbor press. See Figure. Note location of piston pin through gauge window. Press piston pin from piston.

NOTE: Piston and pin must be at standard room temperature when measuring fit. Piston pin should gravity-fall through the piston at room temperature. Piston pin cannot be reused after removal.
scientia non olet · About LEMON Manuals