LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Wagoneer >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Engine Cooling >> Water Pump >> Installation

Water Pump: Installation

Ensure gasket surfaces are clean. Install water pump. Tighten bolts to specification. Ensure pump turns freely. Reverse removal procedures. Fill and purge air from cooling system.

NOTE: It may be necessary to remove heater hose to remove trapped air if system cannot be purged using following procedures.
scientia non olet · About LEMON Manuals