LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Timing Chain & Sprocket >> Installation

Timing Chain & Sprocket: Installation

Install timing chain and sprockets. Ensure timing marks are aligned. See Fig 1. Install camshaft sprocket bolt. Tighten bolts to specification. Install new front cover oil seal. Reverse removal procedure for remaining components.

Fig 1: Timing Chain & Sprocket Alignment
G91009Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals