LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Rocker Arms & Bridge >> Removal

Rocker Arms & Bridge: Removal

  1. Remove PCV valve hose at valve cover. Remove cruise control servo (if equipped). Remove valve cover. Alternately loosen each rocker arm bolt one turn at a time.
  2. Remove rocker arm assemblies and push rods. Mark components for reassembly. Components must be installed in original location.
scientia non olet · About LEMON Manuals