LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

  1. Drain cooling system. Remove radiator. Discharge A/C system if necessary. Remove A/C condenser and receiver assembly (if equipped). Remove fuel pump (if equipped with mechanical pump), ignition wires and distributor.
  2. Remove cylinder head. See CYLINDER HEAD  in this article. Remove hydraulic lifters. Using Lifter Remover/Installer (J-21884), remove lifters. Mark lifter location for reassembly reference.
  3. Remove engine front cover. See ENGINE FRONT COVER  in this article. Remove timing chain and sprockets. Remove front bumper and grille (if necessary). Carefully remove camshaft.
scientia non olet · About LEMON Manuals