LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Rotor Servicing >> RUNOUT

Rotor Servicing: RUNOUT

  1. Measure rotor lateral runout by mounting a dial indicator on support stand or steering spindle. Position indicator stylus so it contacts center of rotor braking surface.
  2. Zero indicator and turn rotor one revolution. Note indicator reading. Runout must not exceed specification. Refer to the DISC BRAKE SPECIFICATIONS  table. Refinish or replace rotor (if necessary).
NOTE: Thickness of machined rotor must not be below minimum thickness specification.
scientia non olet · About LEMON Manuals