LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Drum Brake Shoes - Except Grand WAGONEER >> Installation

Drum Brake Shoes - Except Grand WAGONEER: Installation

  1. Lubricate support plate ledges, anchor pin, adjuster cable guide, adjuster screw assembly, parking brake lever and lever pivot pin with molybdenum disulphide grease.
  2. Connect parking brake lever to secondary brake shoe with washer and "U" clip. Crimp ends of clip to secure clip on pivot. Remove wheel cylinder clamp. Position brake shoes on brake support plate and install hold-down springs.
  3. Install parking brake lever strut and spring. Install adjuster cable guide plate and adjuster cable on anchor pin. Install primary return spring. Install guide to secondary brake shoe. Install secondary return spring.
  4. Install adjuster screw, spring and lever. Connect lever to cable. Using Brake Gauge (J-21177-01), preset brake shoe adjustment. Install brake drums. Adjust brake shoes with drum in place.
  5. Install wheels and lower vehicle. To adjust and balance brake system, apply and release brakes 10-15 times while driving forward and backward. Road test vehicle.
scientia non olet · About LEMON Manuals