Disc Brake Pads: Installation

To install, reverse removal procedure. On Grand Wagoneer, lubricate new bushings, sleeves, bushing grooves, and small ends of mounting bolts with silicone lubricant. Install rubber bushings in caliper mounting ears.
On all other models, clean caliper mating surfaces on adapter with a wire brush. Apply double sided adhesive tape to back side of inner pad. Clean caliper piston surface. Lubricate caliper mating surfaces on caliper adapter.
On all models, lubricate caliper mounting bolts using brake corrosion lubricant and tighten mounting bolts. Add brake fluid to reservoir. Apply brakes until brake pedal is firm. Check brake fluid level.