LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1988 >> Comanche Eliminator, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Wheel Cylinder >> Reassembly

Wheel Cylinder: Reassembly

  1. Lubricate cylinder bore and internal components with brake fluid. DO NOT  lubricate dust boots. Position replacement piston cups on spring expanders. Install assembled parts in cylinder bore.
  2. Ensure expanders are seated in piston cups. Cups are to be installed with lips facing each other. Install pistons with flat sides facing interior of bore. Install dust boots.
scientia non olet · About LEMON Manuals