LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Valve Spring >> Removal

Valve Spring: Removal

  1. Remove rocker arm cover and bridge assembly of valve to be serviced. Remove rocker arm with pivot and push rod.
  2. Remove spark plug and install Air Hose Adapter Tool (J-23590) in spark plug hole. Apply a constant pressure of 90 psi (6.3 kg/cm2 ).
  3. Using Valve Spring Compressor (J-2534-1), compress valve spring and remove locks. Remove valve spring retainer, valve spring and oil seal.
scientia non olet · About LEMON Manuals