LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1987 >> Cherokee Limited >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L 6-CYL - VIN [M] & 4.2L 6-CYL - VIN [C] >> Removal & Installation >> Engine Front Cover >> Installation

Engine Front Cover: Installation

  1. Apply gasket sealer to both sides of new front cover gasket and fit gasket to block. Cut end tabs from new oil pan gasket and fit onto oil pan. Cement gasket tabs to oil pan and allow to dry.
  2. Install oil pan seal on lower end of front cover. Heavily coat end tabs of oil pan seal with non-hardening sealing compound.
  3. Position front cover to engine. Place Front Cover Aligner (J-22248) into front cover. Install cover attaching bolts. Tighten all bolts and remove aligner. Reverse removal procedure to complete installation.
scientia non olet · About LEMON Manuals