Transfer Case - Transmission - All Models: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1983 Jeep Wagoneer, 1983 Jeep Scrambler, 1983 Jeep Pickup, 1983 Jeep Cherokee, and 1983 Jeep CJ7. However, it is still accessible from the selected car via links, so may be relevant.
Reverse removal procedures to install, noting the following: Do not tighten exhaust pipe attaching bolts until crossmember has been installed and transmission jack has been removed. Make sure all index marks made at removal are aligned. Tighten all bolts to specification and fill transmission and transfer case with fluid.