LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1985 >> Pickup J20 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Master Cylinder - Grand WAGONEER & Pickup >> Removal

Master Cylinder - Grand WAGONEER & Pickup: Removal

  1. Depress and release brake pedal several times, with engine off, to release any vacuum in power unit. Clean dirt and grease from brake line connections.
  2. Disconnect brake lines from master cylinder. Plug open end of lines. Remove 2 master cylinder-to-power unit retaining nuts. Remove master cylinder.
scientia non olet · About LEMON Manuals