Mechanical - Hydraulic: Drum: Remove & Replace
WARNING: This page is about the Pickup J10, 4.2 C, Automatic, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings on Full Floating Axles.
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Rear,Each,Full Floating Axle,Non Separable | 0.9 | B | ||
| Rear,Each,Full Floating Axle,Separable,Inboard Mounted | 1.1 | B | ||
| Rear,Each,Full Floating Axle,Separable,Outboard Mounted | 0.9 | B | ||
| Rear,Each,Semi-Floating Axle | 0.3 | B | ||
| Additional Procedure: DRUM: Remove & Replace: | ||||
| w/Separable Hub add,Each | 0.1 | B | ||
| Combination Procedure: BRAKE DRUM OR ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.2 | B | ||
| One | 0.3 | B | ||