LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1984 >> Cherokee Base, 4D Utility, 2.5 U, T4 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Printed Circuits >> Cherokee & Wagoneer

Cherokee & Wagoneer

  1. Remove instrument cluster lense and bezel cover. Remove all gauges and tachometer, if used. Remove gauge pin connector clips from cluster housing. Remove lamp sockets from circuit board.
  2. Remove circuit board ground clip at back of speedometer housing. Remove printed circuit board. To install, reverse removal procedures.
scientia non olet · About LEMON Manuals