LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - 727, 904, 998 & 999 >> Component Disassembly & Reassembly >> Valve Body Reassembly >> Shift Valves & Regulator Valve Pressure Sensing Plug

Shift Valves & Regulator Valve Pressure Sensing Plug

  1. Slide shift valves and springs into proper valve body bores. On models with downshift housing, insert limit valve and spring into housing. Slide spring retainer into groove. Install throttle plug in housing bore. Position assembly against shift valve springs.
  2. On all models, install end plate. Tighten retaining screws. Install throttle pressure spring, plug, sleeve and regulator valve plug. Install end plate. Tighten retaining screws.
scientia non olet · About LEMON Manuals