LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - 727, 904, 998 & 999 >> Component Disassembly & Reassembly >> Valve Body Disassembly >> Shift Valves & Regulator Valve Pressure Sensing Plugs

Shift Valves & Regulator Valve Pressure Sensing Plugs

  1. Remove line pressure regulator valve end plate. See Figure . Slide out regulator valve sleeve, line pressure plug, throttle pressure plug and spring.
  2. Remove end plate. On models with downshift valve housing, remove housing and throttle plug. Slide out retainer. Remove spring and limit valve from housing. On all models, remove shift valves and 3 springs.
scientia non olet · About LEMON Manuals