LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1983 >> Scrambler Base, 4.2 C, Standard, T4 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis & Overhaul - 727, 904, 998 & 999 >> Component Disassembly & Reassembly >> Planetary Gear Train >> Disassembly (All Other Models)

Disassembly (All Other Models)

  1. Slide thrust washer and selective snap ring from front of output shaft. Slide front planetary assembly off shaft. Remove snap ring and thrust washer from forward hub of front planetary gear set. Slide annulus gear and support off planetary gear set.
  2. Remove thrust washer from front of planetary gear set. Remove thrust washer from rear of planetary gear set. Separate support from annulus gear, removing snap ring from front of annulus gear (if necessary). Slide sun gear, driving shell and rear planetary gear set off output shaft.
  3. Lift sun gear and driving shell off rear planetary gear set. Remove snap ring and thrust plate from sun gear at rear side of driving shell. Slide sun gear out of shell. Remove snap ring (spacer on wide-ratio models) and thrust plate from opposite end of sun gear.
  4. Remove thrust washer from front of planetary gear set. Remove planetary gear set from assembly. Remove thrust washer from rear of gear set. Remove snap ring from rear of annulus gear to separate support from gear (if necessary).
scientia non olet · About LEMON Manuals